Booster systems are a system used to pump, store and supply water while regulating temperature and pressure in high-rise buildings. Hydrophore tanks are used in the water supply system to maintain the pressure in the facilities.
This system also protects the internal and external surfaces of the plumbing against corrosion. For this purpose, two-sided hot galvanizing, one or two-sided spray galvanizing or ebonite lining is done.
Booster tanks are designed for working pressure up to a certain bar and are usually made of carbon steel. The booster tanks designed for drinking water systems are produced with coating with food grade standards.
All process connections of booster tanks must comply with DIN 2986 standard. This is a standard for threaded steel pipe fittings. All booster tanks are pressure tested. At the same time, the operating systems should be inspected and inspected at the intervals stipulated in the legal regulations.
The main elements of booster tanks are water inlet, water outlet, pressure switch and manometer, air pressure inlet, air discharge, water level sight armature and drainage.
In short, booster tanks are used in buildings and facilities to maintain the required water pressure in the water network, to maintain a certain level and to maintain a variable water reserve, ie to store water. Booster tanks are one of the basic elements of water treatment plants.
The standards that are taken as basis in the control and inspection works carried out by the competent authorities are as follows:
TS EN 806 Indoor installation - Specification for the transport of drinking and potable water
TS 1911 Vertical booster tanks for water supply systems
TS 11490 Booster tanks - Horizontal
TS 6553 Air supply and discharge devices (for vertical booster)
TS 10576 Pressure tank with membrane
The application is received, the contract is followed and the organization, which product, vehicle and work equipment, what type of survey or inspection is determined.
An expert team is guided by the relevant examinations and the evaluations requested by the organization are performed NDT or visually.
The data obtained as a result of the inspection is evaluated by the expert auditors and the accredited inspection report is submitted to the company.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
