CE marking is an application that allows certain product groups determined by legal regulations to move freely in the markets of European Union countries. In short, it refers to the suitability of the European Union countries. CE marking, which means that the devices and equipment to be sent to these countries are in compliance with the criteria determined in terms of safety, health and environmental protection requirements, obliges all manufacturers to comply with the same accountable conditions.
A number of regulations and rules must be followed to affix the CE marking on the products. Products bearing the CE marking have proven that the manufacturer has met all legal requirements during production. Therefore, products with CE marking can be offered to the European Union countries without any obstructions. Consumers also ensure that these products meet certain health, safety and environmental protection requirements.
Within the framework of this system, it is the responsibility of the manufacturing companies to examine the applicability of the products to certain criteria and needs, to prepare a technical file in this direction, to keep the CE certificate when necessary, to declare conformity and to place the CE marking on the products.
The Construction Materials Regulation (305 / 2011 / AB) issued by the Ministry of Environment and Urbanization has made the CE mark mandatory on doors and windows. The standard to be considered in the tests to be carried out in this direction is EN 14351 standard. Producer companies have to have these tests and also apply a factory production control system.
Although the main materials are tested by the manufacturer, the dealers are required to carry out the CE marking as the dealers will produce with a new design. For this reason, CE mark test and certification studies on doors and windows realized by authorized institutions, establishment of factory production control system for dealers, certification of dealers and dealer audits are also included.
Here are a few standards based on CE marking and testing of doors and windows made by the competent authorities:
TS EN 14351-1: 2006 + A2 Windows and doors - Product standard, performance characteristics - Part 1: Windows and ready-made exterior doors suitable for pedestrian passage.
The application is received, the contract and then the product, vehicle and vehicles for which, what kind of service is determined exactly.
The necessary laboratory environment is prepared and the products, tools and instruments requested by the organization are tested by experts with the reference of the existing standards and measurements are made.
The data obtained as a result of meticulously completed tests, measurements and analyzes are evaluated and accredited approved reports are submitted by expert engineers.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
-testleri.jpg "Axle Tests")
