Understanding the chemical composition of a safe and healthy pool is important in many ways. Even under normal use, many unwanted substances can fall into the pool and potentially cause water damage. These substances may make the water unhealthy and unappealing or may interfere with the function of chemicals that are added to the pool water for safety and health purposes.
The two most important points for healthy and reliable pools are that they are sterilized and balanced. Chlorine is the most effective way to sterilize a swimming pool and to keep swimming people safe. Bacteria from rains, animals or the skin of humans can contaminate and contaminate pool water. All of these are important factors for using chlorine or a similar disinfectant.
A balanced swimming pool must be at suitable levels for the following five basic pool water components: total alkalinity, pH, calcium hardness, stabilizer and total dissolved solids. These components work together to help the disinfectant work more effectively. The balance of the water changes constantly and therefore pool water analysis should be performed at regular intervals.
Total alkalinity indicates how alkaline it is in the pool water. However, pH and total alkalinity of water affect each other. Low alkaline water causes low pH and high alkaline water leads to high pH.
Keeping the pH of the swimming pool within the appropriate range is important for both swimmer comfort and equipment in good condition. The pH value indicates the acidity and alkalinity of the pool water. At low pH values, chlorine is rapidly dispersed and high pH values inactivate chlorine.
If the amount of calcium in the pool water is too low, the surface of the pool begins to chalk, and if it is too high, the water may be cloudy. The normal range for calcium hardness is from 200 to 400 ppm.
In general, all waters contain dissolved minerals. When the pool water evaporates, the minerals become concentrated. These minerals make it difficult for the chemicals mixed into the pond water to do their job.
The application is received, the contract and then the product, vehicle and vehicles for which, what kind of service is determined exactly.
The necessary laboratory environment is prepared and the products, tools and instruments requested by the organization are tested by experts with the reference of the existing standards and measurements are made.
The data obtained as a result of meticulously completed tests, measurements and analyzes are evaluated and accredited approved reports are submitted by expert engineers.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
